Webshop » Zender/Ontvangers » GRAUPNER MC-28 with 4D sticks, 16 KANAALS HoTT ZENDER met GR-24 ontvanger

GRAUPNER MC-28 with 4D sticks, 16 KANAALS HoTT ZENDER met GR-24 ontvanger

S1033 GRAUPNER MC-28 with 4D sticks, 16 KANAALS HoTT ZENDER met GR-24 ontvanger
S1033 GRAUPNER MC-28 with 4D sticks, 16 KANAALS HoTT ZENDER met GR-24 ontvangerS1033 GRAUPNER MC-28 with 4D sticks, 16 KANAALS HoTT ZENDER met GR-24 ontvanger

€ 769,00

Levertijd 2-3 werkdagen - Ruime voorraad

The Set contains:
Graupner HoTT mc-28 microcomputer telemetry transmitter with built-in LiPo 6000 mAhtransmitter
Update cable
Receiver GR-24
µSD card
Aluminium case
Hand rests
Neck strap
Transmitter strap (strap: 55% polyester, 45% acrylic, neck pad: 65% polyester, 35% acrylic).
Bluetooth® v2.1+ EDR module

The transmitter

The Graupner remote control mc-28 HoTT with 4D control stick units is designed for the functional model builder who needs additional functions on the control sticks. The 4D control sticks have an additional button, which can be defined as a button or switch in the software and a self-neutralizing potentiometer. For example, a Cameracopter can be used to control the Camera inclination and direction or a crane boom. The mc-28 is suitable for almost all models. 16 control functions, 2 channels can be reprogrammed to multi-channel functions, so that numerous additional switching tasks can be handled, 120 internal model memories, integrated telemetry and voice output as well as the fast and safe bi-directional transmission of the Graupner HoTT 2.4 GHz technology, it all makes the mc- 28 to a true all-rounder.

The mc-28 remote control has an internal circular polarized patch antenna with very high range and reliability.
Two large, high-contrast displays inform you about telemetry data and parameters at all times and enable fast and easy programming.

The switches and buttons of the remote control can be freely assigned and thus individually adapted. 12 mixers are available for programming. 8 Switch phase programs with announcement function can be adapted and named for each model.

Thanks to micro-SD card and micro USB interface, telemetry data and model memories can be imported and exported. Also firmware upgrades are carried out so uncomplicatedly.

Built-inBluetooth® v2.1+ EDR module with 115200 Baud for the application with Graupner HoTT Viewer for Android ' (firmware > = 2.2) for the display of telemetry data on the mobile phone and for voice output via mobile phone.
The language outputs can be output in a timed manner individually.
The warnings can be defined in the mobile phone.
Furthermore, a Bluetooth® v2.1+ EDR headset can be connected directly without a smartphone.

The receiver

The receiver Graupner GR-24 is one of the most successful receivers of the Graupner range. This compact receiver with its almost 16 grams has 12 channels and provides with its two antennas always constant connection (antenna diversity).
The GR-24transmits receiver voltage and temperature as well as signal strength to the transmitter without additional components. The warning thresholds can be easily programmed via the transmitter.
The receiver also has 3 free mixers, SUMD or PPM (SUMO) sum signal and various failsafe functions (hold, position and OFF)

You will find the latest software and firmware in the section "Service / Help" under "Updates".

The Graupner Shop offers you a wide range of accessories and spare parts for your remote control system and your model.

Age recommended by manufacturer: 14 years or younger ◾Microcomputer remote control set implemented with the very latest 2.4 GHz Graupner HoTT technology
◾Ring limiter and channel sequencer
◾Bidirectional communicationbetween transmitter and receiver
◾Wireless T/P function
◾6 different languages (German, English, French, Italian, Spanish and Dutch) available via software update. For the availability of a given language, go to the Download area.
◾Storage of telemetry data with date and time
◾Servo cycle times of 10 ms can be selected for digital servos
◾Ultra-fast response times through direct and reliable transmission of data from the main processorto the 2.4-GHz transceiver. No additional delays due to detours via a module processor.
◾Operating and programming are similar to the proven concepts implemented in the mx-24
◾A high-contrast, blue-illuminated graphic display ensures perfect control of parameter settings such as model type, model memory, timers and operating voltage.
◾12 control functions
◾Free assignment of all switches
◾24 model memories
◾10 switches/keys and 2 slider regulators as well as 2 side rotary controls
◾Modes 1 to 4 freely selectable
◾CAP TOUCH operating elements with key lock function to prevent unintentional operation.
◾Numerous telemetry, programming and evaluation functions are presented directly on the transmitter's screen
◾Voice output can be called up via freely programmable switches
◾Extensive programs for fixed-wing and helicopter models
◾Swashplate limiter
◾"Monitor" switch to check all switches and control switches
◾12 freely programmable mixers for wing or helicopter models, each with freely selectable input and output functions, including 4 curve mixers with 5-point curve technology in 1% increments, resulting in curve values that are easy to set and adjust at up to 5 points for throttle, pitch, tail or other non-linear actuations. The processor in the CPU employs an ingenious method of calculating polynomial approximations for truly-rounded, ideal MPC (multi-point curve) mixer curves.
◾8 flight-phase programs can be individually adapted for each model and given a name. The switchover time is programmable separately.
◾SUPER SERVO menu with a perfectoverview of all servo setting data and simple parameter correction for 4 "levels" (direction of rotation, mid-point setting, separate servo travel on both sides and separate travel limiting on both sides for 12 servos with a total of 72 possible settings)
◾SUPER-DUAL-RATE, EXPO menu with 36 possible settings for 3 servo functions and 6 flight phases.
◾Highly practical multi-function menu for fixed-wing and helicopter models. Entry of the number of aileron and flap servos automatically programs all necessary mixer functions in the multi-function "Wing mixers" menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function and other special functions
◾Helicopter swashplate mixer for 1, 2, 3, or 4-point steering.
◾Fail-safe for 12 servo functions
◾Convenient timers menu. Stopwatch system, alarm timer, countdown timer, laps counter, etc. Two timers and one lap counter/timer can be displayed at the same time.
◾Stopwatch with history: in addition to the lap counter there is a time 1 which captures the ON time and a time 2 which records the ON and OFF times separately.
◾The transmitter's operating time timer is automatically reset to zero by the battery charging process.
◾Flight phase switch assignments: now 6 switches, 2 with priority function. Every switch combination can be named freely. This makes the number of flight phases independent of the number of flight phase switches.
◾Linearising switchplate servos: electronic compensation for non-linear travel of swashplate rotary servos.
◾Tail type normal, V-tail, Delta/flying-wing and 2 EL Sv 3+8 (which immediately makes 2 coupled elevator servos available without using free mixers or dual mixers)
◾Flap count up to 4 AIL/4 FL: Full support of 8 wing servos, now even without use of free mixers.
◾Flight phase switching delay, can be switched off: the delay time can be switched off for individual channels flight phase by flight phase (e.g. for motor off in electric models or to activate/deactivate helicopter head lock).
◾16 phase names
◾Fixed-wing mixer: New concept for the multi-flap menu to simplify settings of up to 8 wing servos on a flight-phase-specific basis in a comprehensible manner without requiring the use of free mixers.
◾Number of flight phases: (fixed-wing: 7, helicopter: 6 + AR)
◾Phase trim
◾Switchable Snap-Flap mixer EL => FL with a new offset function for easy course corrections and fast turns
◾3 ring limiters for Voith-Schneider and similar drives
◾Channel sequencer for 3 channels for folding motors and landing gear doors
◾Logical switches
◾Trim memory
◾Multi-channel function to expand channels for up to 14 additional channels
◾Music player and internal speaker for voice output and music
◾Swapping of servo assignment at receiver output on transmitter side and receiver side
◾PPM signal adjustable at the data output
◾Model memories of the mx-20 can also be loaded directly into the mc-20. To do so, simply copy the model memories on the PC to the appropriate directory. Then the switches and controls must be newly assigned because of the different hardware.

◾Linearization of swash plate servos : Electronic compensation of the non-linear path of swash plate.
◾Tail configuration type normal, V tail, delta / flying wing, 2 ALE Sv 3 + 8 (two interconnected elevator servos are available immediately without the use of free mixers / crossmixers)
◾Flap number up to 4 AILE / 4 FLAP: Full support of 8 wing servos, now also without the use of free mixers.
◾Switch-off of the flight phase changeover delay: The deceleration time can be switched off for individual channels in the flight phase mode (eg for motor-off in the case of electric models or head-lock activation / deactivation for helis).
◾16 phase names
◾Wing mixer: Newly designed multi-flap menu for simplest settings of up to 8 wing servos in a flight-specific and clear manner even without the use of free mixers.
◾Number of flight phases: (airplane: 8, Heli: 7 + AR)
◾Phase trimming
◾Switchable Snap Flap Mixer ELE -> FLAP with new offset function for easy course corrections and fast turning
◾3 ring limiters for Voith-Schneider drives and similar
◾Channel sequencer for 3 channels for folding propulsion and landing gear flaps
◾Logic switches
◾Trim memory
◾Multichannel function channel expansion for up to 14 additional channels
◾Musicplayer and internal speaker for voice output and music
◾Interchangeable servo assignation on the receiver output from receiver side and transmitter side
◾PPM signal can be set at the data output

◾General HoTT features:

◾Simple and extremely fast binding
◾Range test and warning function
◾Undervoltage warning
◾Extremely wide receiver operating range from 3.6 V to 8.4 V (functional up to 2.5 V)
◾Failsafe, channel mapping, mixing functions and all servo settings are easily programmable with internal telemetry
◾Binding of any number of receivers for channel expansion (32 channels maximum)
◾Up to 4 servos can be controlled simultaneously in block with a servo cycle time of 10 ms (only digital servos!)
◾Maximum interference immunity through optimized frequency hopping and wide channel spreading
◾Intelligent data transmission with correction function
◾Extremely fast rebinding even at maximum distance
◾Telemetry evaluation in real time
◾More than 200 systems can be used at the same time
◾Future-proof by updating via USB interface or microSD card

NEW: Safety:

FHSS, frequency hopping over up to 75 channels

Maximum interference immunity through optimised frequency hopping, wider channel spread and antenna diversification

Intelligent data transfer including error correction

Extremely wide range: 3000 (downor front> 1000) m

Range test and warning function

Undervoltage warning

Extremely wide receiver operating voltage range of 3.6 V to 8.4 V (functional up to 2.5 V)

Numerous fail-safe functions

Keylock function to prevent unintentional changes to menus


Shorter response times can be set (10 ms period time)

No additional delays due to module processors All hopping management is handled directly by the 32 bit main processor.

Synchronous servo operation made possible by simultaneous control of servo outputs in blocks of 4

Pilot feeling:

Essentially delay-free control responses due to direct processing

Real-time telemetry evaluation

Optional voice output for timers, telemetry data and warnings via headset connector

Repeat function and continue function for voice output can be programmed via freely assignable switches

Pre-selection of voice output to be used

Separately adjustable volume for beeps and voice output

Integrated telemetry display with 8 x 21 characters or 128 x 64 pixels, optionally in text or graphics form

Duration of display lighting: ALWAYS, 30 s, 60 s, 90 s, 120 s

Micro SD card slot for storage of telemetry data similar to a black box and for expansion of model memories

PC software for analysis or display of downloaded telemetry data

Buzzer signal programmable for peak T/P function receiver output, satellite receiver, simulators, flybarless stabilization systems, etc.

Model-memory-dependent binding, except for copied model memories

Wireless teacher/pupil function

3 flight phases programmable

Swashplate limiter

Motor off function

Numerous fixed-wing and helicopter mixers

Other features:

Simple and extremely fast binding

Free channel assignment (channel mapping), transmitter and receiver mixer functions and all servo settings are simple to program

Binding of any number of receivers for channel expansion (16 channels maximum) The last receiver bound sends the telemetry data.

Update capability via PC interface guarantees future viability

Control function: 16
Width [mm]: 228 mm
Height [mm]: 66 mm
Temperature range [°C] : -15 ... 55 °C
Antenna: Patch
All-up weight [g]: 1250 g
Frequency : 2400 ... 2484,5 MHz
Range approx. [m] : ~3000 m
Overall length [mm]: 235 mm
Dimensions [LxWxH in mm]: 235 (315) x 228 x 80 mm
Current consumption [mA]: 400 mA
Operating voltage neutral [V] : 3,4 ...4,35 V
Total weight of Lithium Ion packs in the package: 127 g
Battery, Lithium Ion Battery name energy in Watt per hour: 27 W
Touch Display: No
Voice output: Yes
Flight phase: Yes
Channels: 16
Micro SD: Yes
Display?: Yes
USB connection: Yes
Transmitter type: Console
HoTT - Technology: Yes
Language variant: DE
Transmitter series: mc